Mixer for bulk products SPB-1
The mixer is designed for mixing bulk products (coffee, buckwheat, peanuts, pistachios, nuts) with salt or flavor solutions. It can be used as part of automated lines or as an independent device for preparing raw materials for roasting or drying.
The equipment consists of a solid frame on which a storage tank (barrel) is fixed.
This equipment is optimal for mixing various products, due to the trajectory of the mixture inside the tank (barrel), achieved using the calculated angle of attachment of the tank (barrel) to the rotation shaft. This allows you to get rid of blades and paddles inside the tank (barrel), thereby eliminating places where the product accumulates.
Job Description
The prepared (cleaned and washed) raw materials are poured into the container (barrel) through the neck, after which the saline solution of the required consistency (selected individually for each product) is poured into the container. Then the neck is closed with a lid and a locking device. The lid has a rubber seal and hermetically seals the container, eliminating leaks during the operation of the mixer.
When the “Start” button is pressed, the electric drive begins to rotate the container (barrel) in a vertical plane. The operation of the mixer is based on the “drunk barrel” principle, i.e. when the barrel rotates, due to the tilt of its vertical axis relative to the plane of rotation, the raw materials move inside along a trajectory in the form of the figure “8”. This achieves maximum efficiency in mixing raw materials with saline solution – the mixture hits the walls of the barrel at different angles, scatters, changes directions of movement and mixes with oncoming flows of the mixture.
The mixer operating time is determined by the operator – to stop, press the “Stop” button. After that, it is necessary to open the lid of the container and, tilting the neck of the barrel, pour out (dump) its contents.
Standard equipment
- Mixing container with sealed lid;
- Metal frame with adjustable supports;
- Control unit (Start/Stop).
Additional equipment
- Accumulating bin with electronic control unit;
- Frequency converter (to change the rotation speed);
- Corrugated pipe (air intake);
- Movable supports (wheels).
Equipment
- Electric drives – STM (Italy);
- BU – PackTech (Ukraine);
- Frequency converters – INVT, HYUNDAI (Korea);
- Product contact parts – 304 steel.
Additional information
| Power supply, V/Hz | 380/50 |
| Electricity consumption, kW/hour | 0,8 |
| Pneumatic supply**, atm./l.min. | absent |
| Length/Width/Height (not more than), mm | 1200/1300/1400 |
| Weight (not more than), kg | 190 |
| Capacity of container, l | 180 (280) |
| Filling volume of the tank, l | 100 (200) |
| Productivity*, kg/hour | 6000 |
* Performance depends on the properties and type of product being mixed.
Peculiarities
The mixer is designed for mixing bulk products both with each other and with various solutions. In most cases, it is used to prepare bulk products such as seeds, nuts, peanuts, pistachios for frying by mixing them with a water-salt solution. Mixing spices and food coloring components is also common. It can also be used for non-food products.
The model features the trajectory of the mixture inside the barrel, achieved using the calculated angle of attachment of the container to the rotation shaft. This allows you to get rid of the blades and paddles inside the container, thereby eliminating places where the product and dirt accumulate.
This equipment is available in one model SPB-1, with a modification in terms of container volume (180 and 280 liters).
up to 6000 kg/hour
bulk, liquid products
